TC Miniature Lighting Systems

 

Control your dolls house, model railway or diorama lighting with the ULTIMATE controllers.


homeproducts contact ustrade enquiriesdownloads

 
dolls house lighting
railway lightingdiorama lighting
TC Systems Technology Limited

TCS8400 and TCS8401

  Miniature Lighting Sequencer/Controllers

  • Easily connects to your new or existing circuits

  • Incredible 'real fire' flicker effect

  • Connect up to 8 lighting circuits 

  • Dim and/or flicker any circuit, at any time

  • Set up 8 different sequences

  • Each sequence can have up to 63 pattern steps

  • Each pattern step can be set from 1 second to 4 minutes 15 seconds in one second increments

TCS8400  8 channel, 8 sequences,  63 steps per sequence, random flicker and dim on any circuit - any time, individual sequence step times set by you 

 

 

Picture illustrates the TCS8400

 Designing a sequence...

A pattern is set up where each of the circuits are independently set to off or one of three levels of brightness; there is also the option of any of the circuits flickering randomly at any level of brightness - like REAL fire;

  • After the first pattern is set up a time of 1 to 255 seconds is set

  • The next pattern is then set up, and again a time

  • This continues for as few or as many patterns as you like up to 63

  • Design and setup - up to 8 different sequences and select any one at any time by a single button press!

What's REALLY neat is that the controller remembers everything - even with the power off, and starts up with the sequence that it was running through when it was turned off!

TCS8400
TCS8401
SPECIFICATION TCS8400 TCS8401

Channel Outputs

8 8
Connections Twin mini terminal blocks Twin mini terminal blocks
Output Levels off, dim, brighter, full on off, dim, brighter, full on
Output Extras random 'real fire' flicker - any output level (not off!), any circuit, pattern and sequence random 'real fire' flicker - any output level (not off!), any circuit, pattern and sequence
Output Drive 1 output - 500mA 4 outputs - 300mA 8 outputs  -180mA max ALL Outputs - 3A (Total 8A max per board)
Input Supply 5 to 30V DC 5 to 30V DC
Sequences 8 8
Patterns per Seq. 63 63
Indicators 14 14
Buttons 12 12
Size 130mm x 80mm x 25mm

(dimensions may change)

180mm x 80mm x 25mm

(dimensions may change)

Fixings 4 x 3mm holes/rubber feet 4 x 3mm holes/rubber feet
Back to TOP of page
 
12 February 2017 Copyright TC Systems Technology Limitedİ 2017 Webmaster:web@tcstl.com